qualtek electronics corp. ppc division part number: 882-06/013 description: emi filter tolerance +/- (mm) dim range (mm) 0-1 1-6 6-18 18-50 50-120 120-250 250-500 0.15 0.20 0.30 0.50 0.70 0.90 1.20 drawn / date checked / date approved / date b.zhang 10-31-02 10-31-02 jjh / 10-31-02 unit: mm rev. c controlled approved date description rev. revision b c rohs compliancy updated temp rating, insertion loss, and notes 06-01-06 07-28-16 dp ly these drawings are the property of qualtek electronics and not to be reproduced for or communicated to a third party without the express written permission of an officer of qualtek electronics. l: 1.05mh cx: 0.1uf cy: 2200pf r: 1.0m 1. physical dimensions 2. electrical schematic panel cutout (mounting from front) l according to panel thickness 0.8~2.0mm l=55.9 2.1~3.2mm l=56.2 32.0 0.5 28.0 0.5 58.0 0.5 54.0 0.5 2.0 0.3 3.0 0.3 55.0 1.0 27.9 0.5 46.0 0.5 51.3 1.0 41.0 0.5 r2.0max (4x) 28.5 0.2 0 l 0.2 0 electrical characteristics: 1-1. voltage rating...................................115/250vac 1-2. current rating a. @ 115 vac..........................................6 a rms max b. @ 250 vac.........................................6 a rms max 1-3. operating frequency......................50/60hz 1-4. leakage current: each line to ground a. @ 115 vac 60hz............................0.20 ma max b. @ 250 vac 50hz.............................0.40 ma max 1-5. hipot rating (for one minute) a. line to ground...........................2250 vdc b. line to line.....................................1450 vdc 1-6. minimum insertion loss in db: (at 50 ohm system) 1-7. operating temperature.................-25 to +100 c (derating above 40?c) 1-8. safety: 1-9. fuse size: 5x20mm (fuses not included) 1-10. rohs compliant freq. mhz com. mode db dif. mode db .05 6 1 .01 / / .10 10 2 .15 12 4 .50 18 10 1.0 24 15 5.0 35 35 10 40 40 30 40 40
|
